Check the cam assembly arm that activates the Micro Switch. Is it staying up and not returning down?
Corrective action would be to loosen the two cam screws a bit they could be over tightened causing binding. If there is still an issue replace the cam (p/n 102680).
If there are wires landed on the J2 fire loop, check the LED2. If it…
The arm may have been installed wrong. To reinstall the arm, remove from spindle and…
Refer to the installation instructions and follow the instructions
The key is turned to the armed position, but the device does not sound when…
The likely causes are that either: - Your door contact is not activating when the…