The device mounts to the wall and 2 external magnetic switches need to be used. The switches are wired in series and connected to the green terminal block on the top of the board. The JP1 jumper wire also needs to be cut on the board.
New Braunfels, TX — Detex Corporation is honored to announce its nomination for the Outstanding…
Regular door hardware maintenance is essential for ensuring safety, security, and compliance with building codes.…
If there are wires landed on the J2 fire loop, check the LED2. If it…
The arm may have been installed wrong. To reinstall the arm, remove from spindle and…
Refer to the installation instructions and follow the instructions