Universal Controllers and Power Supplies

Detex Series 800 Universal Controllers and Power Supplies

Universal Controllers and Power Supplies

10-800 - A universal logic and power controller that allows total control over all electrified hardware.All connections for local or remote signaling contained in one box. The 10-800 provides at least 2 amps of DC power at the door. Available, is an integral battery charging circuit for lead acid/gel cell battery stand-by operation in the event of a power failure. UL requires 4 hours of operation followed by 24-hour recharge period and then be able to provide another 4 hours of operation.

11-800 - Same as the 10-800 and in addition has an added insert and 24 point terminal strip.

20-800 - Series 800 circuit board inside a beige flush mounted back box. Constructed from 16 gauge galvanized steel and door is powder-coated neutral beige. Lock with 2 keys. Requires low voltage source of power.

30-800 - Series 800 circuit board inside a surface box, constructed from 16 gauge galvanized steel with screw down lid. Requires low voltage source of power.

31-800 - Series 800 circuit board mounted on a flat mount plate - no back box. Requires low voltage source of power.

40-800 - Same as 11-800 but requires low voltage source of power.

41-800 - Same as 10-800 but requires low voltage source of power.

50-800 - Series 800 circuit board. Requires non-conductive support studs and low voltage source of power.

Power Supplies for Electrified Options

Models Available

80-800 Power Supply -1.0A continuous (Can be used with EE products)

Input voltage 120VAC @ .6A
Input voltage status LED
Output voltage 24VDC Regulated
Filtered @ 1.0A continuous
Thermal Fuse protected for auto resetting of electrical circuits
Transformer fuse protection
Fire Loop input (factory jumpered - normally closed contact)
Fire alarm relay
Enclosure size - 11.25" x 11.25" x 3.5", 18GA steel

81-800 Controller and Power Supply - 1.0A continuous + ER control for 1 door & operator

Input voltage 120VAC @ .6A
Input voltage status LED
Output voltage 24VDC Regulated
Filtered @ 1.0A continuous
Thermal fuse protected for auto resetting of electrical circuits
Transformer fuse protection
Fire Loop input (factory jumpered - normally closed contact)
Fire alarm relay
Enclosure size - 11.25" x 11.25" x 3.5", 18GA steel
Status LED for door activity
Adjustable / disable relatch timer
Form C relay for output to automatic door operator - adjustable delay .5 - 1.5 seconds
Status LED for operator activity
Input for Access Control
Optional M12 - 12VDC @ 400mA to power 12 volt Access Control

82-800 Controller and Power Supply - 2A continuous + ER control for 2 doors & 1 operator

Input voltage 120VAC @ .8A
Input voltage status LED
Output voltage 24VDC Regulated
Filtered @ 2.0A continuous
Thermal fuse protected for auto resetting of electrical circuits
Transformer fuse protection
Fire Loop input (factory jumpered - normally closed contact)
Fire alarm relay
Enclosure size - 11.25" x 11.25" x 3.5", 18GA steel
Status LED for Door 1 and Door 2 activity
Adjustable / disable relatch timer
Form C relay for output to automatic door operator - adjustable delay .5 - 1.5 seconds
Status LED for operator activity
Input for Access Control
Optional M12 - 12VDC @ 400mA to power 12 volt Access Control

83-800 Controller and Power Supply - 2A continuous + ER control for 2 independent doors & 2 operators

Input voltage 120VAC @ .8A
Input voltage status LED
Output voltage 24VDC Regulated
Filtered @ 2.0A continuous
Thermal Fuse protected for auto resetting of electrical circuits
Transformer fuse protection
Fire Loop input (factory jumpered - normally closed contact)
Fire alarm relay
Enclosure size - 16" x 14" x 6.5 ", 16GA steel
2 separate controllers located inside enclosure, each with following features
- Control for 1 door & 1 operator
- Status LED for door activity
- Adjustable / disable relatch timer
- Form C relay for output to automatic door operator - adjustable delay .5 - 1.5 seconds
- Status LED for operator activity
Input for Access Control
Optional M12 - 12VDC @ 400mA to power 12 volt Access Control